Announcement
We've Moved
The forum here @ PSC has been fun, but we're going to transplant it in much more fertile pastures.If you already have a PSC account, use your email address to Request A New Password to get started @wetJacket
#1 Tue, Sep 1, 2009 3:31 PM
- SteveHansen
- Karma: 0
- Rookie
RS 1 inserts
What's up boys! I'm freezin' my ass off up in MN and could use a visit to the warm waters of Bithlo.
I'm trying out a RS-1 (on a MPD last three seasons). I noticed the inserts are up about an inch or so on the RS-1 versus the MPD. Seems like I need to put my bindings all the way back to have them in the same location as I did on the MPD. Thinking there must be a reason the insert location changed. Got any insight? Are people tending to put the bindings back on the RS-1 relative to neutral?
Thanks,
Steve
#2 Tue, Sep 1, 2009 6:31 PM
- ColinBuchanan
- Karma: 2
- Slalom Mentor
- Skis At: SkiTek
- Foot Forward: Left
Re: RS 1 inserts
They switched to the sequence plate when they made the RS-1 ski and boots. Just make sure you measure from the back of your bindings to the tail of the ski and make sure your measurements are lining up!
