Something is funky about the DFT settings for 2007 Nomad in the database. May be a mix of needle and flat dimensions. These are from D3 website...
Recommended settings for 2007 Nomad RC Slalom
(Speed and line length can affect settings)
Needle Flat Wing at Wing at
Size Length Depth From Tail From Tail 34 mph 36 mph Binding
63" 6.89" 2.502" 0.760" 0.710" 7 degrees 8 degrees 28"
65" 6.91" 2.512" 0.770" 0.720" 7 degrees 8 degrees 29"
66" 6.92" 2.515" 0.775" 0.725" 7 degrees 8 degrees 29.5"
67" 6.93" 2.517" 0.780" 0.730" 7 degrees 8 degrees 30"
68" 6.94" 2.520" 0.785" 0.735" 7 degrees 8 degrees 30.5"
Well there is a 2007 Nomad RC in the database and all DFT measurements came from D3 (not off their website) and were measured with the needle as noted in the database. Should give you a good place to start from but most everyone will still need adjustments after starting with these settings. Thanks for posting the website stock settings Deke! We might have to work those into the database....
Colin,
What's weird is going down the list the DFT goes up and down. I'll bet this is a mix of needle vs flat.
Deke